Payment & Shipping Terms:
|Product:||Paper Sheet Cutting Machine||Model:||DW|
|Width::||1300mm, 1450mm, 1600mm||Speed::||0-100m/min|
|Maximum Support Weight::||2 Ton.||Maximum Paper Roll Diameter::||φ 1200mm|
automatic paper cutting machine,
paper sheet cutting machine
Single Facer Corrugated Box Machine / Corrugated Cardboard Paperboard Production Line
Width: 1300mm, 1450mm, 1600mm
Maximum support weight: 2 ton.
Maximum paper roll diameter: φ 1200mm.
Electric mill roll stand
1) Maximum paper roll diameter: φ 1200mm.
2) Maximum support weight: 2 ton.
3) Adopt single slide symmetrical four arm structure, at the same time support two roll of base paper.
4) Equipped with manual brake disc type, can adjust the tension the base paper.
5) Clamping arm, rotating machinery is equipped with uniform torsion clutch, operate safely and reliably.
Single facer corrugated machine
1)Adopt cover type vacuum absorption, prevent high and low flute, improve the quality of corrugated cardboard, automatic cycle for the glue, corrugated pressure, pneumatic operation, glue coating part can be pneumatic glued.
2) Corrugated roller is made by special alloy steel precision grinding, the whole gears are hardening the hardness can reach HRC55-60.
3) The main shaft is lubricated by high temperature lubrication grease, good seal, and reliable lubrication.
4) Economic speed is 45m; effective width is 1650-1850mm
The above models equipped with double circle or ordinary type for the user to choose from
1)Reasonable mechanical structure, strong rigidity, good stability, strong practical life
2)All operating controls on the same side, easy to operate, photoelectric counting
3)Paper cutting range four knife slitting, crosscutting 400 mm - 2400 mm
4)Paper cutting accuracy: ±2.5 mm
HeBei Xin-Tian Carton Machinery manufacturing co., ltd is a specialized incorporation that deals with the design and production of carton machine sand is the first one being created in the North carton machinery base in DongGuang. The higher staffs of the incorporation listen carefully and adopt the suggestions and advices from clients in using the national and international advanced techniques and experiences, and lay stress on the less cost, higher effciency and economical and practical characteristics of products.
Contact Person: Hellen